Complete Tutorial for Installing a New Shower Unit

Complete Tutorial for Installing a New Shower Unit

Blog Article

Get Quote Now

What are your thoughts on How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installment needs mindful planning as well as a great deal of work. For the most part, you will need to do three kinds of tasks: framing wall surfaces, setting up the plumbing, as well as ending up walls.

Different Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be linked to the bath faucet based on your requirement, and the water temperature can be changed via the faucets. Push-on mixers are cheap and also very basic to mount. However, although the tube connection is straightforward, it is conveniently dislodged. Furthermore, it is troublesome to adjust the temperature level.

Bath/Shower Mixer: The tube and spray of this type of shower are integrated with a bathroom mixer tap, and also the temperature can be adjusted via the bathroom taps. It is an extremely cheap alternative and no extra plumbing is entailed. However, the bath/shower mixers also struggle with bothersome temperature control alternatives.

Manual Mixer: The hose pipe as well as spray of a hand-operated mixer shower system are a part of the wall surface device and also the cold and hot water supplies are linked to a single shutoff The temperature level and pressure of the water are regulated with either one or a variety of handles (in more costly showers). Although temperature level control is much easier in manual mixer kinds, they are much more pricey than the formerly discussed mixers. They additionally need extra plumbing of cold and hot water system pipelines.

Thermostatic Mixer: The tube and also spray of this shower type belong of the wall surface device and also the cold and hot water products are connected to a single shutoff right here as well. It is total with an integrated stabiliser to self-adjust the water temperature level and also to avoid it from ending up being also hot. Among the greatest benefits of a thermostatic mixer shower type consists of practical temperature level control. Nonetheless, it is one of the most expensive of the different mixer options.

Power Shower: A power shower is a solitary unit containing a powerful electrical pump that can altering both the water stress and also temperature level. This type of shower can be fitted if there is water system from a cold water cistern as well as a hot water cylinder. A power shower makes the adjustment of both stress and temperature very easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a mix boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it heats up the water electrically. It is essential to note that for this shower kind to be mounted, the keys stress requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit enables the temperature level and stress to be changed by means of a handle. Versions with temperature stabilisers are better as they continue to be untouched by other taps somewhere else in operation within the household. A significant downside of electric showers is that the control knob only allows for the option of high temperatures at less stress, or reduced temperature levels at a greater pressure. This is problematic in the winter season when the spray is commonly weak and also the mains water is chillier. Nonetheless, this problem is tackled in some versions which are available with a winter/summer setting.

Many Common Blunders

Breaking or overlooking local code restrictions.

Utilizing pipes that are too small.

Attaching copper to galvanized without using a brass or dielectric fitting in between both.

Not utilizing tape or pipeline compound at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air gap filling up for fixtures.

Cutting supply stub outs as well brief to set up the shutoff valves onto after the ended up wall remains in location.

Not appropriately aligning tubing right into installations or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will trigger a leakage.).

When transforming the water back on in your home, constantly run the outdoors hose shutoff or purge your commodes to hemorrhage dust and also air from the lines. This particles can trigger issues in your sink taps and various other plumbing trim.

Preparation.

To start with, you have to decide on the kind of shower that you want to install. It is essential to ascertain whether the chosen shower is capable of handling particular systems as well as can control a risk-free level of water with the central heating boiler. A lot of shower devices nowadays are developed to be adaptable to different water stress (such as kept warm water as well as cold mains).
It is also important to consider the water pressure and also the planning of the piping and also water drainage for the shower.

Approach.

Relying on the kind of shower you want to set up, the shower head need to either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it must have a check valve.
Before beginning, it is advisable to note the settings of the shower head and control, and also to plan the pipe-work entailed. In addition, the water drainage system to remove the waste water will require to be planned. Both placements of the cable course and also the shower button will certainly also need to be taken into consideration if a rapid or electric shower device is being mounted.
Utilize the guideline overview offered with the shower system to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is very important to cut off the water system. In order to shield the pipes, they must be provided a waterproof covering as well as also fitted with separating shutoffs. The pipelines can after that be buried into the wall surface and plastered over to neaten the general appearance.
Fit the base tray, shower head, as well as installations.
Link the main shower control to the pipes that will certainly be providing the water (This may require a female screw string adapter).
Reconnect the supply of water and examination the pipelines for any type of leaks, as some might require tightening.
If you are setting up an electric shower, bear in mind to turn off the power supply before making any kind of electric links. When these links have been made (there should be advice within the instruction manual), the power supply can be changed back on.

Adjusting Water Stress to Match Your Shower.

The cold water tank can be raised to a greater height (sometimes just 150mm (6inches)) by fitting a strong wood assistance under it - perhaps composed of struts and blockboards. If you choose this option, the main and also circulation pipelines will additionally need to be raised to satisfy the new elevation of the reservoir.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it should be attached into the power supply in order to operate.

Piping and Drainage.

It is best to use 15mm diameter supply pipes, and also make the runs to the shower as brief as well as straight as possible so as to maintain optimal stress as well as minimise warmth loss. Additionally, by reducing the use of arm joints for pipe corners, you can decrease the resistance in the flow of the supply of water. You can achieve this by bending the pipelines rather.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed our section about How to Install a One-Piece Shower Unit. Thanks for taking the time to read through our posting. Enjoyed our write-up? Please share it. Help someone else check it out. Kudos for your time. Visit us again soon.

Request An Appointment

Report this page